98
Precautions
■ Installation
• Avoid placing the drive in a location subject to:
–high humidity
–high temperature
–excessive dust
–mechanical vibration
–direct sunlight.
We recommend to use the drive in a horizontal or vertical position.
Do not use it in a tilted position.
■ Operation
• Do not move the drive during operation. This may cause it to
malfunction during reading or writing.
• Avoid exposing the drive to sudden changes in temperature as
condensation may form on the lens inside the drive as a result.
Should the surrounding temperature suddenly rise while the drive
is on, wait at least one hour before you turn off the power.
Operating the drive immediately after a sudden increase in
temperature, may result in a malfunction during reading or
writing.
■ Transportation
• Close the disc drawer before moving the drive.
• Keep the original packing materials for future transport of the
drive.
Precautions
Rear Panel
1 F.GND (Frame ground) tab
Connect with one of the host computer’s ground cables when the
drive’s frame is not in direct contact with the computer.
1 Unused
2 ANALOG AUDIO connector
Outputs analog audio signals.
3 Configuration Jumpers
See page 11 for details.
4 INTERFACE CONNECTOR (SCSI bus)
Connect to 50 pin SCSI host adapter.
5 DC INPUT (power-in) connector
Connect to the power supply of the host computer.
Location and Function of Parts and Controls
Pin 1
1 2 3 4 5
