28
DFW-SX900
DFW-X700
SETTINGS OF CAMERA CONTROL AND STATUS REGISTER
CSR F0F00820h Gain
Adjust the gain of the video signal amplifier. Auto Gain Control can be also set.
(1) Manual adjustment
Command = 82000nnnh nnn: Adjust in the range of 800h (min) – 8B4h (max).
800h is the standard value.
(2) Auto Gain Control
ON : Command = 83000∗∗∗h ∗∗∗: Undefined
OFF : Specify 82000nnnh. (Or read out the gain value once and rewrite the value.)
CSR F0F00830h Trigger
When inputting a negative polarity signal to the TRIG IN connector at the back of the camera, isochronous transmission of
images for only one frame will be performed.
ON : Command = 8200mnnnh m = 0: mode0
m = 3: mode3
nnn becomes effective and trigger is input
repeatedly at intervals 10 ms times the value set.
OFF : Command = 80000000h
NOTE
: If the CSR F0F00600th settings are not set properly and Iso_EN is not ON at the same time,
no isochronous transmission of images will be executed even when trigger signals are
input.
CSR F0F0088Ch Optical Filter
Set the appropriate white balance preset for the main light source.
Lighting Command
--------------------------------------------------------------
tungsten lamp (3,200 K) 82000000h
day light (5,600 K) 82000001h
NOTE
: The CSR F0F0080Ch White Balance is canceled by this command. (Priority to latter)
