70
GB
The remaining charge indicator is incorrect.
• The battery charge will quickly get used up and the actual remaining battery charge will be
lower than the indicator in the following cases:
– When you use the camera in an extremely hot or cold location.
– When you use the flash and zoom frequently.
– When you repeatedly turn the power on and off.
– When you set the screen brightness higher using DISP (screen display) settings.
• A discrepancy arose between the remaining charge indicator and the actual remaining battery
charge. Fully discharge the battery pack once, then charge it to correct the indication.
• The battery pack is discharged. Insert the charged battery pack (page 13).
• The battery pack is dead. Replace it with a new one.
Cannot charge the battery pack while it is inside the camera.
• You cannot charge the battery pack using the AC Adaptor (sold separately). Use the battery
charger (supplied) to charge the battery.
The CHARGE lamp flashes while charging the battery.
• Remove and reinsert the battery pack, making sure it is installed correctly.
• The temperature may be inappropriate for charging. Try charging the battery pack again
within the proper charging temperature range (10 °C to 30 °C (50 °F to 86 °F)).
Cannot record images.
• Check the free capacity of the internal memory or “Memory Stick Duo” media (pages 32, 45).
If it is full, do one of the following:
– Delete unnecessary images (page 48).
– Change the “Memory Stick Duo” media.
• You cannot record images while charging the flash.
• When shooting a still image, set the mode dial to other than (Movie Mode).
• Set the mode dial to (Movie Mode) when shooting movies.
• You can record movies with an image size of [1440×1080(Fine)], [1440×1080(Standard)] or
[1280×720] on “Memory Stick PRO Duo” media. When using recording media other than
“Memory Stick PRO Duo” media, set the movie image size to [VGA].
• The camera is in Smile Shutter demonstration mode. Set [Demo Mode] to [Off].
Cannot create panoramic images.
• Pan the camera as the guidance bar with a constant velocity. You cannot create panoramic
images in the following situations:
– Pan the camera too fast or too slow.
– Pan the camera in the different direction from the setting.
• If there is too much camera shake during panning, the shooting stops. Hold the camera firmly.
Shooting still images/movies
