23
Shooting still images
, Select [ON] with v on the
control button, then press
EXEC.
When you press MENU, the menu
disappears and the (self-timer) indicator
appears on the LCD screen.
, Center the subject in the LCD
screen and press the shutter
button fully down.
The self-timer lamp flashes red and a
continuous beep sounds. The image will be
shot after approximately 10 seconds.
To cancel the self-timer in the middle
of the operation
Close the lens cover or press POWER to
turn off the power.
• If you press the shutter button while standing in
front of the camera, the focus and the exposure
may not be correctly set.
3
2.0M
10
101
2.0M
SELFTIMER
ON
OFF
EXEC/
4
2.0M
10
101
2.0M
Self-timer
lamp
Selecting a flash mode
, Set the mode switch to , and
press v ( ) on the control
button repeatedly to select a
flash mode.
Each time you press v ( ), the indicator
changes as follows.
No indicator (Auto): Based on the
lighting conditions, the camera will decide
if there is enough light, and will use the
flash accordingly.
(Red-eye reduction): Flash mode is
set to Auto, and the red-eye reduction
operates if the flash strobes.
(Forced flash): The flash strobes
regardless of the surrounding brightness.
(No flash): The flash does not strobe.
2.0M
10
101
2.0M
