Table of
contents
Operation
Search
MENU/Settings
Search
Index
29
GB
Intelligent Sweep Panorama
Allows you to create a panoramic image from composite images. The camera also automatically
detects people’s faces or moving subjects.
1 Set the mode dial to (iSweep Panorama).
2 Align the camera with the end of the subject to be
shot and press the shutter button.
3 Pan the camera to the end of the guide,
following the indication on the LCD screen.
• If you cannot pan the camera across the entire subject within the given time, a gray area occurs in the
composite image. If this happens, move the camera faster to record a full panoramic image.
• Since several images are stitched together, the stitched part will not be recorded smoothly.
• Under low light conditions, panoramic images may be blurred or the shooting may not be successful.
• Under lights that flicker, such as fluorescent lights, the brightness or color of the combined image will
not always be the same.
• When the whole angle of panoramic shooting and the AE/AF locked angle are very different in
brightness, color and focus, the shooting will not be successful. If this happens, change AE/AF locked
angle and shoot again.
• Intelligent Sweep Panorama is not suitable for the following situations:
– Subjects are too close to the camera
– Images with little contrast, such as sky, sandy beach or lawn
– Images with constant changes, such as waves or waterfalls
• You cannot create panoramic images in the following situations:
– You pan the camera too quickly or too slowly.
– There is too much camera shake.
Notes
This part will not be taken
Guidance
bar
Continued r
