A SERVICE OF

logo

21
EN
Playing MDs
Locating a Particular Point in a
Track
You can also use 0 and ) to locate a particular
point in a track during playback or playback pause.
To locate a point Press
While monitoring the
sound
) (forward) or 0 (backward)
and keep pressing until you find
the point.
Quickly by observing the
display during playback
pause
) or 0 and keep pressing
until you find the point. There is
no sound output during this
operation.
z If “—Over—” appears while you are pressing )
during playback pause
The disc has reached to its end. Press 0 (or =) or
turn AMS counterclockwise to go back.
Notes
If the disc reaches the end while you are pressing )
during sound monitoring, the deck stops.
Tracks that are only a few seconds long may be too short
to scan using the search function. For such tracks, it is
better to play the MD at normal speed.
When you directly locate a track with a number over
25 Z
You must press >25 first, before entering the
corresponding digits.
Press >25 once if it is a 2-digit track number, and twice
if it is a 3-digit track number.
To enter “0,” press button 10.
Examples: To play track number 30
Press >25 once, then 3 and 10.
To play track number 100
Press >25 twice, then 1, 10 and 10.
You can extend the playing time during music scan
1 While the deck is stopped, press EDIT/NO twice to
display “Setup Menu”.
2 Turn AMS to select “M.Scan Menu”, then press AMS.
3 Turn AMS to select the playing time within a range of
6 to 20 seconds (in 1 second steps), then press AMS.
4 Press EDIT/NO.
To pause playing at the beginning of a track
Turn AMS (or press = or +) after pausing
playback.
To go quickly to the beginning of the last track
Turn AMS counterclockwise (or press =) while the
display shows the total track number and total disc
playing time, remaining recordable time of the disc, or
disc name (see page 19).
)
0
§
=+
fl
pr
0/)