7
5. How to use “Dial/Disconnect”
By clicking the [Dial/Disconnect] button, you can jump to the “Dial/Disconnect” page.
• To connect:
1 Enter the telephone number(s) of a remote party into the box(es): A1( to C2) (When using a LAN,
enter an IP address or a DNS name.)
2 Set the communication attribute.
3 Click the [DIAL] button.
4 The message, “Now dialing...” appears.
5 After the connection is made, the message, “Connect OK.” will appear, and the screen will return to
the “Dial/Disconnect” page.
• To disconnect:
1 Click the [DISCONNECT] button.
2 The message, “Now disconnecting...” appears.
3 After the disconnection is completed, the message “Disconnect OK.” will appear, and the screen will
return to the “Dial/Disconnect” page.
• To clear the dial number:
1 Click the [CLEAR] button.
2 The number(s) entered on this menu will be cleared and the screen will return to the “Dial/
Disconnect” page.
