filename[Z:\#Camera#\DSCW1\3091535111DSCW1U2\11adv.fm]
masterpage:Left
72
model name1[DSC-W1/W12]
[3-091-535-11(1)]
When [USB Connect] is not set
to [PictBridge] in the SET UP
settings
Even if you turn on the camera, you cannot
use the PictBridge function. Disconnect the
USB cable and set [USB Connect] to
[PictBridge] (page 71).
Printing images
You can select the image and print it. Set up
the camera following the procedure on
page 71, and connect the printer.
• You cannot print movies.
• When an error notification is received from the
connected printer, the indicator flashes for
approximately five seconds. Check the
connected printer.
In single-image mode
a Display the image you want to
print with b/B.
b Press MENU.
The menu appears.
c Select (Print) with b/B, then
press z.
d Select [This image] with v/V,
then press z.
The print setting screen appears.
• Setting items that the printer does not
support cannot be displayed.
e Select [Quantity] with v/V,
select the number of sheets
with b/B.
You can select the number up to 20.
Control button
MENU
101
2/9
1M
Exit
OK
1
Off
Off
Index
Date
Quantity
Print
