Attaching a lens
Preparing the camera
25
GB
Notes
• When attaching a lens, do not press the lens release button.
• Do not use force when attaching a lens.
• E-mount lenses are not compatible with this camera.
• When using a lens equipped with a tripod socket, attach the socket on the lens side to
the tripod to maintain balance.
• When carrying the camera with a lens attached, hold both the camera and the lens
firmly.
• Do not hold the part of the lens that is extended for zoom or focus adjustments.
To remove the lens
1
Press the lens release button
all the way in and turn the
lens counterclockwise until it
stops.
Lens release button
2
Attach the caps to the front
and rear of the lens and the
body cap to the camera.
• Before you attach the caps, remove
any dust.
• A rear lens cap is not supplied with
the DT 18-55mm F3.5-5.6 SAM II
Lens Kit. If storing the lens without
attaching it to the camera, purchase
Rear Lens Cap ALC-R55.
