15
SLV-ED818 GB 3-065-581-E1 (1)
Setting the timer
manually
You can preset up to eight programmes
at a time.
Before you start…
• Check that the VCR clock is set to the
correct time.
• Insert a tape with its safety tab in
place. Make sure the tape is longer
than the total recording time.
• Turn on your TV and set it to the
video channel.
1 Press MENU and select TIMER SET/
CHECK, then press OK.
2 Set the date, start and stop times,
programme position, and tape speed:
1 Press , to select each item in turn.
2 Press M/m to set each item.
To correct a setting, press < to return to
that setting and reset it.
To record the same programme every day or the same day every
week, press m while the date is flashing. For details, see “Daily/
weekly recording” next page.
To record from a source connected to the LINE-1 IN or LINE-2 IN
jacks; press INPUT SELECT or PROG +/– to display “L1” or “L2”
in the “PROG” position.
INPUT SELECT
MENU
OK
M/m/</,
PROG +/–
?/1
OK
PLAY
MENU
OK
PLAY
TIMER SET / CHECK TUE
25.1
DATE
START STOP PROG
– .–– –: –– –: –– –– –
– .–– –: –– –: –– –– –
– .–– –: –– –: –– –– –
– .–– –: –– –: –– –– –
– .–– –: –– –: –– –– –
– .–– –: –– –: –– –– –
– .–– –: –– –: –– –– –
– .–– –: –– –: –– –– –
2
TIMER SET / CHECK TUE
25.1
DATE START STOP PROG
2.5
12
TUE
– : –– –:–– ––
SP
– .–– –: –– –:–– –– –
– .–– –: –– –:–– –– –
– .–– –: –– –:–– –– –
– .–– –: –– –:–– –– –
– .–– –: –– –:–– –– –
– .–– –: –– –:–– –– –
– .–– –: –– –:–– –– –
2
continued
01GB02CNT-ED818.p65 12/3/01, 11:10 AM15
