Basic Operations36
SLV-X827MN 3-858-297-11 (1)
Setting the timer
manually
If G-CODE is not available in your area,
follow the instructions below to set the
timer to record programmes.
Before you start…
• Check that the VCR clock is set to the
correct time.
• Insert a tape with its safety tab in
place. Make sure the tape is longer
than the total recording time.
• Turn on your TV and set it to the
video channel.
u
(on/standby)
CURSOR
> / . / ? / /
EXECUTE
MENU
1 Press MENU and select TIMER SET/
CHECK, then press EXECUTE.
2 Set the date, start and stop times,
programme position, and tape speed:
1 Press CURSOR / to highlight each
item in turn.
2 Press CURSOR >/. to set each item.
To correct a setting, press CURSOR ? to
return to that setting and reset.
To record the same programme every day or the same day every
week, press CURSOR . while the date is highlighted. For details,
see “Daily/weekly recording” on the next page.
To record from a source connected to the LINE-1 IN or the LINE-2
IN jacks, press INPUT SELECT on the VCR to display “LINE1” or
“LINE2” in the “PROG” position.
•
CURSOR
TIMER SET / CHECK
:
9.
12 TUE
DATE START STOP PROG
––––––
:
––––.––
:
––––––
:
––––.––
:
––––––
:
––––.––
:
––––––
:
––––.––
:
––––––
:
––––.––
:
––––––
:
––––.––
:
––––––
:
––––.––
:
––––––
:
––––.––
TIMER SET / CHECK
:
9.
12 TUE
DATE START STOP PROG
SP
–––––
:
–––
12
.10
:
––––––
:
––––.––
:
––––––
:
––––.––
:
––––––
:
––––.––
:
––––––
:
––––.––
:
––––––
:
––––.––
:
––––––
:
––––.––
:
––––––
:
––––.––
WED
• MENU
•
CURSOR
• EXECUTE
INPUT SELECT
123
456
789
0
