33
Shooting still images
• You cannot use the flash in the Burst mode.
• If the menu is currently displayed, press MENU first so that
the menu disappears.
• When using the Auto, (Red-eye reduction) or (Forced
flash) mode, you may notice some noise in the image when
you look at the LCD screen in a dark place, but this will have
no effect on the shot image.
• While charging the flash, the flash charge lamp flashes. After
the charging is complete, the lamp goes out.
• When you press the shutter button halfway down while the
flash is strobing, the flash charge lamp turns on.
To reduce the red-eye phenomenon
when shooting live subjects
When the red-eye reduction is selected,
indicator appears on the LCD screen, and the flash
pre-strobes before shooting to reduce the red-eye
phenomenon.
• Red-eye reduction may not produce the desired effects
depending on individual differences, the distance to the
subject, if the subject does not see the pre-strobe, or
other conditions.
