11
Main Specifications
AUDIO INPUT/OUTPUT SPECIFICATIONS
Name Connector Type
Number of channels
Standard input/output level Max input/output level Input/output impedance
MIC IN (REAR) XLR-3-31 4 -54dBu -24dBu 2.2kΩ
(FRONT) PHONE
ST1 input Phono Jack 1(Stereo) -10dBu +20dBu 20kΩ
ST2 input Phono Jack 1(Stereo) -10dBu +20dBu 20kΩ
ST3 input(A,B,C,D) Phono Jack 4(Stereo) -10dBu +20dBu 20kΩ
Echo return input Phono Jack 1(Stereo) -10dBu +10dBu 20kΩ
Mic group output Phono Jack 1 -10dBu +10dBu 470Ω
Echo send Phono Jack 1 -10dBu +10dBu 470Ω
Master output Phono Jack 1(Stereo) -5dBu +15dBu 470Ω
Rec output Phono Jack 1(Stereo) -10dBu +10dBu 470Ω
Speakers output Screw type 1(Stereo) Rated output 125W + 125W (8Ω 1kHz THD 0.1%)
binding terminal 170W + 170W (4Ω 1kHz THD 0.1%)
VIDEO INPUT/OUTPUT SPECIFICATIONS
ST3 input(A,B,C,D)
(S-VIDEO) Mini-DIN 4 1Vp-p(Y) 75Ω
(VIDEO) Phono Jack 1Vp-p 75Ω
Master output
Rec output
(S-VIDEO) Mini-DIN 2 1Vp-p(Y) 75Ω
(VIDEO) Phono Jack 1Vp-p 75Ω
CONTROL TERMINAL SPECIFICATIONS
RS-232C terminal D-sub 9 male 1 7 function is controled
CONTROL-S input
φ
3.5 jack 1
CONTROL-S output
φ
3.5 jack 1 Through out from input
EMG CONTROL Screw type 1 Break contact, 24V signal control (Active "break")
terminal
OTHER TERMINALS
Antenna in BNC 2 DC 9V out 20mA max
+48Vphantom power Power supply for MIC 1 to 4 XLR terminals only
ELECTRICAL CHARACTERISTICS
ITEM MEASUREMENT CONDITIONS STANDARD
Frequency characteristics 20 to 20kHz, 1kHz reference, master output +0.5, -1dB
Total harmonic distortion MIC IN-Master output, 1kHz -54dBu input less than 0.05%
ST input -Master output, 1kHz -10dBu input less than 0.01%
Input conversion noise level MIC IN input, 150Ω termination, IHF-A less than -126dBu
S/N ratio ST input, input short, IHF-A more than 85dB
Rasidual noise level Master volume 0, IHF-A, Speaker output less than 100µV
Crosstalk 1kHz, between L-R channels less than -60dB
1kHz, between input channels less than -80dB
TONE MIC L.C.F fc=100Hz -12dB/oct
TREBLE 10kHz (shelving type) ±12dB
BASS 60Hz (peaking type) ±12dB
Frequency characteristics 50 to 10MHz, reference 3.58MHz +0.5dB, -1dB
Crosstalk 3.58MHz, 1Vp-p less than -50dB
S/N ratio 100kHz, H.P.F, 5MHz, L.P.F more than 65dB
Frequency characteristics 50 to 10MHz, reference 3.58MHz +0.5dB, -1dB
Crosstalk 3.58MHz, 1Vp-p less than -50dB
S/N ratio 100kHz, H.P.F, 5MHz, L.P.F more than 65dB
AUDIO SYSTEM
VIDEO
SYSTEM
S-VIDEO
Power requirment AC 230V 50/60Hz
Power consumption 400W
Dimensions 482 × 132 × 350 (width/height/depth) mm
not includeing max protrusion
Weight 15kg
Operating temp. 0°C to 40°C
Storage temp. -20°C to 60°C
Suplied accessories Operating instructions (1)
Remote control (SRP-351RM) (1)
Battery R6 SIZE AA (2)
