47
GB
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Right
STR-DN1010
4-174-068-11(1)
Basic Operations
To activate the muting function
Press MUTING (RM-AAP051 only) or
(RM-AAP052 only) on the remote.
You can also use MUTING on the receiver.
The muting function will be canceled when
you do the following.
• Press MUTING (RM-AAP051 only) or
(RM-AAP052 only) again.
• Increase the volume.
• Turn off the receiver.
• Perform Auto Calibration.
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
You can enter a name of up to 8 characters for
inputs and display it.
This is convenient for labeling the jacks with
the names of the connected components.
1 Press V/v repeatedly on the
“Input” screen to select the
input you want.
2 Press TOOLS/OPTIONS.
The option menu appears.
3 Press V/v repeatedly to select
“Name Input”, then press .
4 Press V/v/B/b to select a
character, then press .
The name you entered is registered.
To cancel naming input
Press RETURN/EXIT O.
You can check the sound field, etc., by
changing the information on the display.
Press AMP, then press DISPLAY
repeatedly.
You can also use DISPLAY on the receiver.
Each time you press DISPLAY, the display
will change as follows.
Input name you selected
a)
t Original input
name t Sound field currently applied t
Volume level t Stream information
FM and AM band
Program Service name
b)
or preset station
name
a)
t Frequency t Program Type
indication
b)
t Radio Text indication
b)
t
Current Time indication (in 24-hour system
mode)
b)
t Sound field currently applied t
Volume level
Naming the input (Name Input)
Name lnput
Input Assign
Input
BD
TV
VIDEO 1
SAT/CATV
DVD
Viewing information on the
display
AMP
DISPLAY
continued
