When the receiver enters standby mode, the image from the last HDMI device selected
before you turned off the receiver is displayed. If you are enjoying content from another
device, play the content on the device and perform the One-Touch Play operation, or turn
on the receiver to select the HDMI device from which you want to enjoy content.
Make sure [Standby Through] is set to [On] or [Auto] in the HDMI Settings menu.
[228] Troubleshooting Image
The home menu does not appear on the TV screen.
The home menu can only be used when you connect the TV to the HDMI OUT A (TV) (*)
or HDMI TV OUT (**) jack.
Press HOME to display the home menu.
Check that the TV is connected correctly.
The home menu may take some time to appear on the TV screen depending on the TV.
*
For STR-DN1060 only
**
For STR-DN860 only
[229] Troubleshooting Image
The display panel is turned off.
If the PURE DIRECT indicator on the front panel lights up, press PURE DIRECT to turn
off this function.
Press DIMMER on the receiver to adjust the brightness of the display panel.
[230] Troubleshooting Sound
No sound or only a very low level of sound is heard, no
matter which device is selected.
Check that all connecting cables are inserted to their input/output jacks on the receiver,
speakers and the devices.
Check that the receiver and all devices are turned on.
