A SERVICE OF

logo

1-5
XCD-U100/SX90/V60
XCD-U100CR/SX90CR/V60CR
1-3-5. CN-3020 Board
1. Remove the upper case and lower case.
(Refer to Section 1-2-1.)
2. Remove the rear panel assembly.
(Refer to Section 1-2-2.)
3. Remove the twelve solders of the connector from the
CN-3020 board.
4. Remove the screw, then remove the CN-3020 board.
5. Install the CN-3020 board in the reverse order of steps
1 to 4.
CN-3020 board
PM2 x 4
Rear panel assembly
Solders