18
4.2 Maintenance schedule 4. Maintenance
It is advisable to install pressure gauges on both sides of the pump so that any problems within the pump/pipework can be
monitored.
Maintenance schedule
Your weekly schedule should include:
- Checking the oil level in the gearcase with the pump stationary.
- Checking the seals for leakage and replacing as necessary.
- Checking the oil seals for leakage.
- Check pumping pressures.
In certain operational circumstances the pump will pose a thermal hazard and as such should not be touched during operation.
After shutdown the pump unit should be allowed time to cool.
Oil should be changed every 3000 hours of operation or a period of 2 years, whichever is the soonest.
Part description Quantity
Lip seal drive end 1
O-ring rotorcase cover 1
Lip seal gland end 2
O-ring rotor sealing shaft end 2
O-ring rotor sealing nut end 2
Primary seals 2
Recommended Spare Parts
The table shows recommended spare parts that should be
retained within your maintenance schedule.
