A SERVICE OF

logo

Open as PDF
next previous
User Guide 31
Automatic 2-Sided Printing
Caution
Never put media in the Duplex Unit; the printer reports a
media jam.
Use only laser bond paper for automatic two-sided printing
in the paper tray. Do not use any special media (glossy coated
paper) to print automatic two-sided printing. Two-sided
printing can be done manually; refer to Manual 2-Sided
Printing From the Multi-Purpose Tray on page 35.
Automatic two-sided printing requires that the Lower Tray Assembly
be installed.
1. Make sure that the Duplex Unit is inserted in the printer’s upper
(a) slot.
2. Load 75 - 90 g/m
2
(20 - 24 lb.) paper in the paper tray.
If you are using pre-printed paper, such as letterhead:
a. Place the first side to be printed face-down.
a
b
c
Legal
Paper
A/Letter
Paper
Duplex
Paper
0632-27
2-Sided Prints