Setup Guide
1
Getting Set Up
At a glance
Page
1.
What you get with your printer
2
2.
Select a location for the printer.
4
■
Optional: Set the printer on the Lower Tray Assembly.
3.
Set up the printer:
6
■
Load the toner cartridges.
7
■
Install the imaging unit.
12
■
Install the fuser roll cartridge.
15
■
Attach the extensions for the multi-purpose tray.
19
4.
Plug in and turn on the printer.
23
5.
Set the front panel language.
25
6.
Load paper and make a test print from the front panel.
26
7.
Connect the printer:
32
■
To a PC:
■
Connect the printer to your computer.
33
■
Connect optional peripherals (scanner, hard disk).
34
■
To a network:
■
Connect optional peripherals (scanner, hard disk).
34
■
Go to the
PhaserShare Networking Setup Guide.
8.
Install printer software.
35
9.
Register your printer.
42
10.
Where to go from here
43
