A SERVICE OF

logo

POSTSCRIPT PRINTING ERRORS
641
From DOS (and Windows 3.1)
NOTE
To use this procedure, the printer must be connected directly to your computer, not
on a network.
1 At the DOS prompt, issue the DOS MODE command by typing the following:
MODE LPT1:,,P
2 Start Windows 3.1.
3 Open the Control Panel from the Main menu.
4 Double-click the Printers icon to open the Printers dialog box.
5 Click the Connect button to open the Connect dialog box.
6 Change the port selection from LPT1 to either LPT1.DOS or LPT1.OS2,
depending on the options you see in the dialog box.
7 Click OK.