28 © Titan Tool Inc. All rights reserved.
Hydraulic Motor Cut-Away
Torque flex locknut to
10 ft./lbs. (146N/m).
Use blue Loctite.
Use blue
Loctite on
lock ring.
Use
hydraulic
sealant.
Seal lip must
face up.
Use
hydraulic
sealant.
Torque head plug to
15 ft./lbs. (219 N/m).
Do not over-tighten
o-ring seal.
Torque trip
retainers to
15 ft./lbs. (365 N/m).
Do not over-tighten
o-ring seal.
Torque piston
retainers to
75 ft./lbs. (1095 N/m).
Use red Loctite.
Seal lip must
face down.
Valve rod assembly
is factory set and
permanently Loctited.
Do not disassemble.
Fluid Section
Item Part # Description Quantity
1 143-019 Retainer ring.............................................1
2 107-003 Connecting pin .........................................1
3 106-015 O-ring, PTFE............................................2
4 106-002 Packing set, leather/UHMPWPE/steel .....2
5 106-005 Upper packing spring, SS ........................1
6 107-019 Displacement rod, Severe Service 500.......1
7 106-001 Spring retainer..........................................1
8 106-116 Sleeve ......................................................1
9 106-016 Lower packing spring, SS ........................1
10 569-021 Ball, SS.....................................................1
11 106-011 Piston seat................................................1
12 107-936 Pump cylinder, Severe Service 500.........1
13 106-014 O-ring .......................................................1
14 106-012 Ball cage, SS............................................1
15 138-340 Ball, SS.....................................................1
16 107-013 Foot valve assembly ................................1
Fluid Section Service Kit — Major (P/N 107-501)
Item Part # Description Quantity
6 107-019 Displacement rod .....................................1
12 107-936 Pump cylinder...........................................1
107-051 Pump Service Kit, Minor...........................1
Fluid Section Service Kit — Minor (P/N 107-051)
Item Part # Description Quantity
1 143-019 Retainer ring.............................................1
3 106-015 O-ring, PTFE............................................2
4 106-002 Packing set, leather/UHMWPE/steel........2
10 569-021 Ball, SS.....................................................1
13 106-014 O-ring .......................................................1
15 138-340 Ball, SS.....................................................1
426-051 Loctite sealant ..........................................1
1
Motor/
Pump
Block
5
6
7
8
9
10
11
12
13
3
14
15
16
4
4
2
3
