27
Inlet Accessories
Hoses and Valves
840-211 BLEED LINE ASSEMBLY WITH VALVE
ITEM PART
NO. NO. DESCRIPTION QUANTITY
1 944-620 Bleed Valve 1
2 103-111 Bleed Line Assembly 1
3 539-078 Hose Assembly 1
4 103-117 Tube 1
944-620 BLEED VALVE ASSEMBLY
ITEM PART
NO. NO. DESCRIPTION QUANTITY
1 944-005 Knob 1
2 860-721 Nut, Lock 1
3 944-023 Valve Stem 1
5 944-004 O-Ring 1
6 944-026 Valve Stem Stop 1
7 569-170 Ball, T.C. 1
8 945-003 Gasket, Copper 1
9 944-904 Valve Seat 1
SERVICE INSTRUCTIONS
The 944-620 Series Bleed Valve has a Tungsten Carbide Seat (9) and should not require frequent replacement. The Tungsten Carbide Ball
(7), in normal service, will last a long time because it rotates and wear
s evenly. I f there is leakage, replace the ball. CAUTION: Open the
Adjustment Knob (1), to full counterclockwise position before unthreading Valve Seat (9), from Valve Body (4). I f the Valve Stem (3) is
rotated inwardly with me ball removed, the PTFE O-Ring (5), may require replacement. If mere has been leakage from the valve stem, the
PTFE O-Ring should be replaced. IMPORTANT: The Valve Stem Stop (6), must be unthreaded from the Valve Stem (3), with a socket
screwdriver, then the valve stem can be threaded out of the Valve Body. CAUTION: All non-moving threads must be assembled with Loctite
Sealant, Speeflo Part # 426-051.
103-829 SYPHON HOSE ASSEMBLY
NO. NO. DESCRIPTION QTY
1 103-625 Rock Catcher 1
2 103-550 Tube 1
3 103-682 Hose Clamp 2
4 420-650 Hose, 3/4” 4.5'
5 103-130 Spring 1
6 103-119 Clip 1
7 194-661 Adapter 1
