4 © Titan Tool Inc. All rights reserved.
Table of Contents
Safety Precautions ........................................................................... 2
Grounding Instructions ..............................................................................3
General Description ........................................................................ 4
Specications ................................................................................................. 4
Preparing to Paint ........................................................................... 4
Attaching the Tip to the Gun....................................................................4
Checking the Outlet Valve (optional) .................................................... 4
Attaching the Paint Hose ...........................................................................5
Pressure Relief Procedure ............................................................... 5
Priming ............................................................................................. 5
Preparing to Prime ....................................................................................... 5
Mounting the Paint Hopper......................................................................6
Attaching the Return Tube........................................................................6
Priming the Pump ........................................................................................6
Spraying ........................................................................................... 7
Spraying Technique .....................................................................................7
Practice ............................................................................................................. 7
Cleanup ............................................................................................ 8
Overnight Storage ........................................................................................8
Long-Term Storage ...................................................................................... 8
Maintenance .................................................................................. 10
Removing and Cleaning the Inlet Valves ...........................................10
Removing and Cleaning the Outlet Valve .........................................10
Cleaning the Hopper Screen ..................................................................10
Troubleshooting ............................................................................ 11
Parts Listings .................................................................................. 16
Main Assembly ............................................................................................16
Diaphragm Pump .......................................................................................17
Pump Head Assembly ...............................................................................18
Hopper Assembly .......................................................................................18
Limited Warranty ........................................................................... 20
General Description
This high performance airless sprayer is a precision power tool used
for spraying many types of materials. Read and follow this instruction
manual carefully for proper operating instructions, maintenance and
safety information.
Knob
PRIME/SPRAY
Knob
Paint Hopper
Power Cord
Preparing to Paint
Attaching the Tip to the Gun
1. Lock the trigger by rotating the trigger lock forward until it
stops.
Trigger locked
Tr
igger unlocked
(gun will spray)
POSSIBLE INJECTION HAZARD. Do not spray without
the tip guard in place. Never trigger the gun unless the
tip is in either the spray or the unclog position. Always
engage the gun trigger lock before removing, replacing
or cleaning tip.
2. Thread the tip guard onto the gun. Tighten the nut rst by
hand, then tighten more rmly with a wrench.
NOTE: When attaching the tip guard to the gun, align the
tip guard as shown in the gure below, then tighten
with a wrench.
Begin
tightening
at this angle
to achieve
the desired
spray angle
when tight.
Checking the Outlet Valve (optional)
1. Firmly press the optional pusher valve button on the side of
the pump housing to make sure the outlet ball valve moves
freely.
(optional)
