A SERVICE OF

logo

Open as PDF
next previous
Groundsmaster 5900/5910 Page 7 -- 3 Chassis
Disassembly
1. Park machine on a level surface, lower cutting
decks, stop engine, apply parking brake and remove
key from the ignition switch.
2. Disassemble steering tower as needed using Figure
1 as a guide.
Assembly
1. Assemble steering tower using Figure 1 as a guide.
A. If steering wheel was removed, torque hex nut
(item 18) from 20 to 26 ft--lb (28 to 35 N--m).
B. If steering column (item 5) was removed, torque
cap screw (item 3) from 27 to 33 ft-- lb (37 to 44
N--m).
C. Thrust washers (item 6) on steering c olumn are
used as needed to remove endplay ofsteering shaft.
Chassis