BASIC OPERATION
19
BASE SPEAKER VOLUME SETTING
To adjust the base unit speaker volume, press or .
TONE/PAUSE
INTERFERENCE OR STATIC
If you hear noise during a call, press to
select another channel. The LCD displays
“Scanning” while changing a channel.
PAGING THE HANDSET
1 To locate the handset while it is off the base,
press . The handset beeps for 60
seconds.
To stop paging, press or any
key at the handset, or return the
handset to the base unit.
NOTE:
You cannot page the handset during a call.
Paging
Talk 0:15
Scanning
To
To temporarily switch to tone dial
(When the base is set to pulse mode), see
page 14.
To enter a pause within the dialing sequence
Do this
Press . The following numbers will
be sent as tone dialing.
Press . “P” appears in the display
which represents a pause.
FT-8981.qx 3/14/1 6:00 PM Page 19
