TL-MR3220 3G/4G Wireless N Router User Guide
-42-
• Radius Server IP - Enter the IP address of the Radius Server.
• Radius Port - Enter the port that radius service used.
• Radius Password - Enter the password for the Radius Server.
• Group Key Update Period - Specify the group key update interval in seconds. The
value should be 30 or above. Enter 0 to disable the update.
¾ WPA/WPA2 – Personal (Recommended) - It’s the WPA/WPA2 authentication type
based on pre-shared passphrase.
• Version - you can choose the version of the WPA-Personal security on the drop-down
list. The default setting is Automatic, which can select
WPA-Personal (Pre-shared key
of WPA) or WPA2-Personal (Pre-shared key of WPA) automatically based on the
wireless station's capability and request.
• Encryption - When WPA-Personal or WPA is set as the Authentication Type, you can
select either Automatic, or TKIP or AES as Encryption.
)
Note:
If you check the
WPA/WPA2 – Personal (Recommended) radio button and choose TKIP
encryption, you will find a notice in red as shown in Figure 4-24.
Figure 4-24
• Password - You can enter ASCII characters between 8 and 63 characters or 8 to 64
Hexadecimal characters.
• Group Key Update Period - Specify the group key update interval in seconds. The
value should be 30 or above. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
4.6.3 Wireless MAC Filtering
Choose menu “Wireless → Wireless MAC Filtering”, you can control the wireless access by
configuring the Wireless MAC Address Filtering function, shown in Figure 4-25.
