TL-R480T+ Load Balance Broadband Router User Guide
81
Figure
4-80
¾ Current Statistics Status - Enable or Disable the statistics function. The default status is
disabled. Click the Enable button to use the function. Click the Disable button to disable the
function.
¾ Packets Statistics Interval - The default value is 10. Select a value between 5 and 60
seconds in the pull-down list. The Packets Statistic interval value indicates the time section of
the packets statistic.
¾ Sort Rules - Select the rule for displaying the traffic information.
¾ Statistics Table - This table displays the statistics information about the traffic.
IP Address
MAC Address
The IP address whose statistics information are displayed
Packets
The total amount of packets received and transmitted by the router
Total
Bytes
The total amount of bytes received and transmitted by the router
Packets
The total amount of packets received and transmitted in the last “Packets
Statistic interval” seconds
Bytes
The total amount of bytes received and transmitted in the last “Packets
Statistic interval” seconds
ICMP Tx
The total amount of the ICMP packets transmitted to WAN in the last
“Packets Statistic interval” seconds
UDP Tx
The total amount of the UDP packets transmitted to WAN in the last
“Packets Statistic interval” seconds
Current
TCP SYN
Tx
The total amount of the TCP SYN packets transmitted to WAN in the last
“Packets Statistic interval” seconds
)
Note:
1) If the Current Statistics Status function is disabled, the DoS protection in Advanced
Security will be ineffective.
