A SERVICE OF

logo

Open as PDF
next previous
Figure 5-8 LACP Config
The following entries are displayed on this screen:
¾ Global Config
LACP: Enable/Disable the LACP feature here.
¾ LACP Config
Port Select: Click the Select button to quick-select the corresponding port based
on the port number you entered.
Select: Select the desired port for LACP configuration. It is multi-optional.
Port: Displays the port number.
Admin Key: Specify an Admin Key for the port. The member ports in a dynamic
aggregation group must have the same Admin Key.
System Priority: Specify a System Priority for the port. The System Priority and the
Admin Key constitute the aggregation ID. A dynamic aggregation
group will only be formed between ports having the same
aggregation ID.
Port Priority: Specify a Port Priority for the port. This value determines the priority
of the port to be selected as the dynamic aggregation group
37