TL-WR641G 108M Wireless Router User Guide
- 67 -
function is disabled. To enable this function, change the default IP Address to another IP
Address as desired.
To access the router, you will type your router's WAN IP Address into your browser's Address
(in IE) or Location (in Navigator) box, followed by a colon and the custom port number. For
example, if your Router's WAN address is 202.96.12.8 and you use port number 8080, enter
in your browser: http://202.96.12.8:8080
. You will be asked for the router's password. After
successfully entering the password, you will be able to access the router's Web-based utility.
)
Note:
Be sure to change the router's default password to a very secure password.
4.13.9 Statistics
The Statistics page (shown in Figure 4-68) displays the network traffic of each PC in LAN,
including total traffic and traffic of the last Packets Statistic interval seconds.
Figure 4-68
¾ Current Statistics Status - Enable or Disable. The default value is disabled. To enable,
click the Enable button. If disabled, the function of DoS protection in Security settings will
be ineffective.
¾ Packets Statistics Interval - The default value is 10. Select a value between 5 and 60
seconds in the pull-down list. The Packets Statistic interval indicates the time section of the
packets statistic.
¾ Sorted Rules - Here displays sort as desired.
¾ Statistics Table:
IP Address
The IP Address displayed with statistics
Total Packets
The total amount of packets received and transmitted by the router.
