Broadband VPN Gateway User Guide
Windows Client Setup
To connect to the PPTP (VPN) Server in the VPN Broadband Gateway:
• The Microsoft VPN feature in the VPN Broadband Gateway must be enabled and configured, as described in the previous sec-
tion.
• Each user must have a login (username and password) on the VPN client database on the VPN Broadband Gateway.
• The remote client PC must be configured as described in the following sections.
• It is assumed that remote users have a Broadband (not dial-up) connection to the Internet.
Windows 98/ME
1. Click Start - Settings - Dial-up Networking
2. Select Make New Connection
Figure 90: Windows ME VPN Adapter
3. Type a name for this connection, and ensure that "Microsoft VPN Adapter" is selected. Click "Next" to continue.
Figure 91: Windows ME VPN Remote Host
4. Enter the Internet IP address or domain name of this device. (If you don't have a fixed IP address, you can use a Dynamic DNS
service to obtain a domain name.)
Click "Next" to continue.
5. Click "Finish" to exit the Wizard.
The new entry will now be listed in "Dial-up Networking".
If necessary, you can change the settings for this connection by right-clicking on it, and selecting Properties.
110
