A SERVICE OF

logo

Open as PDF
next previous
TW-H6W1IR ISDN Remote Router
26 Configuration and
Management
Configuration and Management
After the initial startup (POST) test, the router will prompt you for login
and password. This is the opening page of the router’s out-of-band
configuration program, called the Console program. The Console
program is stored in the Flash memory chips in the router and the
settings are written in EEPROM chips in the router. It is the most basic
level for configuring and managing the router and the network to which
it is connected.
If you’re starting the router for the first time, the default login and
password is “Admin” – the login and password are case-sensitive,
alphanumeric characters.