Tripp Lite B070-016-19 Manual

A SERVICE OF

next previous

12

Operation (continued)

General Settings

WiththehighlightlineonthewordGENERAL,press[Enter]. The General Settings window

appears (see Figure 10).

Figure 10 The General Settings window

Security

The Security option in the OSD General Settings Menu allows you to activate or deactivate

PasswordSecurity.Bydefault,PasswordSecurityissettoOff.OnlytheAdministratorwill

be able to activate/deactivate Password Security.

To activate/deactivate Password Security:

1. Highlight the Security option in the OSD General Settings Menu

2. Press the space bar to change Password Security On/Off

3. Pressing the space bar will display a prompt requiring you to enter the Security Password.

(Security Password defaults as 'Admin')

4.Onceyou'vetypedinthecorrectpasswordandhitenter,thePasswordSecuritystatuswill

be changed

Note:OncePasswordSecurityisactivated,HotkeyCommandswillbedeactivated,leaving

you limited to the OSD Menu as your only way to select a port. Once you leave the OSD

Menu,youwillneedtohitthe'Shift,Shift'commandtoaccesstheOSDMenuandselect

another port. You will be required to enter your password each time you enter the OSD Menu.

*Seepage16-17formoreinformationontheSecurityfeatures.

Changing the OSD Hotkey

By default the primary Hotkey is the Shift key. You have the ability to replace the Shift key

with one of 4 different choices in the OSD General Settings Menu.

(SH-SH):ThisrepresentstheShiftkey.ToaccesstheOSDMenuyouhit'Shift,Shift.'To

accessthenextKVMinlinehit'Shift,+.'ToaccessthepreviousKVMinlinehit'Shift,-.'

(CL-CL): This represents the Ctrl key. To access the OSD Menu you can either hit the Left

Ctrl key 2 times or you can hit the Right Ctrl key once and then the Left Ctrl key. You can hit

eitherCtrlkeyonceandthe+keytoaccessthenextKVMinline.YoucanhiteitherCtrlkey

once and the - key to access the previous KVM in line.

(CLF11): This represents the Ctrl key and the F11 key. To access the OSD Menu you hit

eitherCtrlkeyandthenF11.YoucanhiteitherCtrlkeyonceandthe+keytoaccessthe

nextKVMinline.YoucanhiteitherCtrlkeyonceandthe-keytoaccessthepreviousKVM

in line.

(PRSCR): This represents the Print Screen key. To access the OSD Menu you hit the Print

Screenkeyonce.WhenyouselectPrintScreenasyourhotkey,theportselectionhotkeycommands

aredeactivated,leavingtheOSDMainMenuastheonlywaytoswitchtoanotherport.

201002116 93-2925.indd 12 3/15/2010 11:48:47 AM