A SERVICE OF

logo

35
.
www.velodyne.com
SC-IW Installation Manual
S
tep 11 - Install Drywall Above Filler Plate
A
fter the filler plate is secured to the driver module, install a replacement piece of drywall above
the filler plate in the opening. This drywall should be securely fastened to the studs using
drywall screws.
Step 12 - T
ape, Mud, T
exture and Paint Wall
After the SC--IW is installed into the wall, the wall should be taped, textured, blended and then
painted to match the existing wall. Note the grille can also be painted to match the deĀ“cor.
Note: The paint cover should be remain on the driver until this step is complete.
Figure 34: Drywall Installation