Verilux VF02 Manual

A SERVICE OF

next previous

7

Assembly Instructions — continued

3. Attach the lamp head gooseneck to the

shaft until the screw holes line up as

shown in Fig. 3. Use care when tucking

the wire into the shaft. Form a loop with

any excess wire prior to tucking it. Insert

the screw using the tightening tool and

turn clockwise to tighten.

4. Remove the light diffuser from

the protective plastic bag.

Insert the plastic pegs at the

bottom of the light diffuser into

the openings near the bulb

socket. Snap the tab

into place as shown

in Fig. 4.

Note: Be sure all

styrofoam packing

is removed from the bulb

area prior to installing the

light diffuser.

Close-up of screw hole in

the lamp head

Fig. 3

Fig. 4