9
#1POWER SWITCH
Use to turn power on.
#2
POWER INPUT JACK
Connect the AC-12A, AC adaptor (12V AC, 1000mA).
#3REC OUTPUT JACK [RCA PIN JACK]
Connect to the input jack of the tape recorder, MD,
DAT, etc. The output level of this jack is fixed and does not
change with the MASTER LEVEL VOLUME (!9).
#4
GROUND TERMINAL
Connect this terminal to the ground lead of the
turntables.
#5
PHONO INPUT JACK [RCA PIN JACK]
Connect turntables equipped with MM (Moving
Magnet type) cartridge. The signal from the turntable is
fed to the PGM channels when Phono input is
selected.
#6
LINE INPUT JACK [RCA PIN JACK]
Connect the equipment with line level output (-10dB or
0dB), such as CD players, tape decks, DATs, MDs, etc.
The signal from line level equipment is fed to the
PGM channels when Line input is selected.
#7
MAIN MIC JACK [XLR/pin 2:HOT]
Input jack for MAIN MIC.
#8
SUB-MIC JACK [1/4" PHONE JACK]
Input jack for SUB MIC.
#9
MASTER OUTPUT JACK [1/4" TRS BALANCED JACK]
Connect to the input of power amp.
Tip-----HOT
Ring----COLD
Sleeve--GROUND
$0
SUB MASTER OUTPUT JACK [1/4" PHONE JACK]
Connect to input of power amp as monitor in DJ
booth or as a separate sound zone for entrance
foyer etc.
$1
EFFECT SEND JACK [1/4" PHONE JACK]
Connect to the input of the external effects. (Delay,
Reverb etc)
$2
EFFECT RECEIVE JACK [1/4" PHONE JACK]
Connect to the output of the external effects. Can
also be used as an extra input jack.
