Cleaning Chart
PART
Exterlor
surfaces
WHAT TO CLEAN HOW TO CLEAN
Soft cloth and warm soapy
9 Wipe off regularly when cooktop and
water. lower oven are cool.
Nylon or plastic scouring
l
Do not allow iood containing acids
pad for stubborn spots.
(such as vinegar, tomato, lemon
juice or milk) to remain on surface.
Acids will remove the glossy finish.
l
Do not use abrasive or harsh
cleansers.
Surtace units
No cleaning required.
l
Spatters or spills will burn off.
l
Do not immerse in water.
Chrome
reflector
bowls
Automatic dishwasher or
l
Wash with other cooking utensils.
warm, soapy water and
l
Clean frequently.
plastic scrubbing pad.
l
Do not use abrasive or harsh
cleansers.
Control knobs
Warm, soapy water and
l
Wash, rinse and dry well.
soft cloth.
l
Do not soak.
Control panel
Warm, soapy water or
spray glass cleaner.
l
Wash, rinse and dry well.
l
Follow directions provided with
cleaner.
Oven tuck
Warm, soapy water or
soaDy steel wool Dads.
l
Wash, rinse and dry. Use soapy steel
wool pads for stubborn areas.
Standard
oven
l
Remove door for easier access.
l
Place newspaper on floor to proteci
Warm, soapy water or
soapy steel wool pad.
Commercial oven cleaners.
floor surface.
l
Follow directions provided with the
oven cleaner.
l
Rinse well with clear water.
l
Use in well ventilated room.
l
Do not allow commercial oven
cleaner to contact the heating ele-
ments, oven seal, or exterior surfaces
of the range. Damage will occur.
If you need service or assistance,
we suggest you follow these four steps:
1.
Before calling for assistance...
Performance problems often result
from little things you can fix yourself
without tools of any kind.
if nothing operates:
l
Is the power supply cord plugged
into a live circuit with the proper volt-
age? (See “Installation Instructions:‘)
l
Have you checked the main fuse or
circuit breaker box?
14
If the oven will not operate:
l
Is the Oven Selector turned to a set-
ting (BAKE or BROIL]?
l
Is the Oven Temperature Control
turned to a temperature setting?
If surface units will not opemte:
l
Have you checked the main fuse or
circuit breaker box?
