After you have set the desired temperature.
the display will show the set temperature and
the time of day. BAKE will light up.
3. Push the Stop Time pad. The time of day with
the colon flashing and STOP TIME will show
in the display.
4. Use the Hour and Minute pads to set the
desired stop time. Push the “up” (A) or
“down” (r) pad(s) until the correct time shows
in the display.
This example shows a desired stop time of
2 o’clock. This provides a 2-hour cook time
(the difference between the time of day and
the stop time).
5. Push the Start/Enter pad. “Lo”“, HEAT,
TIMED and BAKE will light up in the display to
indicate that the oven is heating.
NOTE: The display will show “door” and a
tone will sound once a minute for 5 minutes if
the door is latched when you try to bake/roast.
You can change the temperature or time
settings any time after pushing the Start/Enter
pad by repeating just Steps 2 through 4.
6. The display will count down the baking/
roasting time in minutes.
7. When the bakfng’roasting time is completed,
the oven will turn off automatically, beep four
times and “End” will show in the display. You
will also hear four 1 -second tones every
minute until you push the Off/Cancel pad.
NOTE: To disable reminder tones, push and
hold the Cook Time pad for 4 seconds. To
reactivate tones, repeat this procedure.
To cancel the MEALTIMER” control setting:
l
Push the Off/Cancel pad to return the display
to the time of day.
19
