A SERVICE OF

logo

Open as PDF
next previous
Printer Operator Guide B-1
Appendix
Print Using LPR
The purpose of this appendix is to help you submit the various test patterns necessary to
perform the pre-calibration and color calibration procedures found in this guide to the printer.
The following procedure uses LPR (Line Printer Remote) to submit a job to the printer.
1. Select [Start] and [Run].
2. Type [cmd] and select [OK].
3. A command-prompt window will appear. Type the following exactly as shown, substituting
the IP Address of the printer for [printer IP address], the and any underscores for spaces; do
not type the underscores unless it is actually part of the queue name: [lpr_-S_[printer IP
address]_-P_[queue name]_ ].
4. Ensure that the command-prompt window is small enough so that you can see the
Windows Explorer window behind it that has the [Color Calibration Resources] directory
open.
5. Select the appropriate test pattern to be printed and hold down the left mouse button.
B