DocuMate 510 Scanner User’s Guide 23
Scanning
Scanning
If you selected the recommended Full Install option for your
scanner’s driver (see page 12), then you have several options for
scanning. Each method scans equally well so use the one with
appropriate options for the item you are scanning.
The scanning options available with the Full Install option are:
• One Touch—Open the One Touch scan panel, adjust the scan
settings as needed, put the document in the scanner, then click
one of the button icons on the One Touch panel. See “Scan
from the One Touch Button Panel” on page 26.
• TWAIN Interface—This option uses your scanner’s TWAIN
interface to scan. Select scanning options before scanning, put
the document in the scanner, then click a button on the TWAIN
interface window. The PaperPort software that you installed for
your scanner uses the TWAIN interface for scanning, but many
other programs use it too so you can also scan from them, as
well as from PaperPort. See “Accessing the TWAIN Interface
from PaperPort” on page 82.
• Windows Image Acquisition (WIA) Interface—This option
uses the Microsoft Windows Image Acquisition (WIA) interface
to scan. Select scanning options before scanning, put the
document in the scanner, then click a button on the WIA
interface window. You can access the WIA interface from the
PaperPort software, or from other applications on your
computer. See “Scanning with the WIA Interface” on page 106.
The WIA interface is only available if your computer is running
Windows XP or Windows Vista.
NOTE: During installation, the One Touch 4.0 software
searches your computer and links to all the applications (known
as the Destination Applications) where it can send and open
scanned documents. To make sure that all the Destination
Applications are linked to One Touch 4.0, Xerox recommends
that you refresh One Touch 4.0 before using your scanner for the
first time. Please see “Check the Scan Settings Before
Scanning” on page 27 for the steps to refresh One Touch 4.0.
