Filter
Top Products
ZE-NC514
5
PRECAUTIONS
1. Never disassemble or a djust the unit without any professional guide. For details,
please consult an authorized ZENEC dealer for inquiry.
2. lf the front panel or TFT monitor is squalid, please use a clean silicone cloth and neutral
detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such as
alcohol for cleaning may result in scratching or discoloration.
3. lf any abnormal behavior of the unit is found, please refer to trouble shooting guide of
this manual. lf no relevant information is found, please press the [RESET] key on the
front panel to resume factory default.
4. lf you have parked the car in hot or cold weather for a long time, please wait until the
temperature in the car becomes normal before operating the unit.
5. Using in-car heater in low temperature environment may result in condensation inside the
unit. DO NOT use the unit in this situation, eject the disc and wipe off the condensation
on the disc. lf the unit still doesn't work after a few hours, please contact with after-sales
service center.
6. No fierce mechanical impact to the LCD monitor when it is in open position for preventing
the damage to any mechanisms inside.
7. To prevent damage to the screen, avoid touching it with sharp objects.
8. The monitor employs auto motorizing mechanism, please don't push, pull, or swivel the
monitor manually to prevent damage to the core mechanism.
9. To provide a clear demonstration and an alternative for easy understanding to the
operation of this unit, graphic illustrations are used. However, these illustrations may be
different from the actual images displayed on the screen.
10. During operating the unit, "
" will display if the current operation is not available
or illegal.
11. Operate the unit correctly according to this manual to prevent unnecessary
problems. The guarantee won't be valid if the problem is caused by
inappropriate operation.
DECLARATION
This product incorporates copyright protection technology that is protected by U.S patents
and other intellectual property rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is prohibited.