Filter
Top Products
Chapter 5 Board Diagrams 37
5.5 Height limitations: side view
At least 3 mm clearance is needed between the carrier board's
surface and the bottom of the CPC-2245. Some suggested suppli-
ers are listed below.
5.6 Component suppliers
Table 5-1: Component suppliers
Location Model number Supplier
CN2 50-pin FPC connector IL-FPR-50S-HF JAE
CN3 12-pin FPC connector IL-FPR-12S-HF JAE
CN4 50-pin FPC connector 145077050112861 ELCO