Filter
Top Products
6
Setup
Follow these directions to correctly set up your monitor.
1. Remove all packing materials and wrapping from the monitor
2. Place the monitor in its desired location. Ensure that there is space around the
monitor, especially the rear area.
3. With the computer turned off, connect the signal cable to the VGA port or DVI
Port on your PC. Make sure connection is secure.
Video Connector
VGA Port
DVI Port
4. To connect the power cord to the Monitor AC socket.
5. Connect the plug Pin of power cord to an AC power source.
A
C Power Jack
Power Cor
d
6. Turn on the computer.
7. Press the soft power switch on the monitor. The display should appear. If no
display appears, check Troubleshooting in this manual.
8. Ensure that your computer display is set at 1024X768 pixels and 60Hz. Press the
AUTO button
exceed 1 second. The monitor optimizes the display
automatically.