Filter
Top Products
1-7
Getting Started
Setting Up the Agilent 83434A
1 Verify that the line power meets the requirements shown in the following table.
2 Connect the line-power cord to the rear-panel connector of the instrument.
3 Connect the other end of the line-power cord to the power receptacle.
Various power cables are available to connect the Agilent 83434A to ac power
outlets unique to specific geographic areas. The cable appropriate for the area
to which the Agilent 83434A is originally shipped is included with the unit. You
can order additional ac power cables for use in different geographic areas.
Refer to “Power Cords” on page 3-7.
Line Power Requirements
Power 115 VAC: 50 Watts MAX
230 VAC: 50 Watts MAX
Voltage nominal: 115 VAC range:90–132 V
nominal:230 VACrange:98–254 V
Frequency nominal:50 Hz/60 Hzrange:47–63 Hz