Filter
Top Products
21
ENGLISH
2 Wind the belt d around the rim of the
steering wheel and fit the holder’s claws
into the holes of the belt to secure the
holder. The excess must be trimmed
off, as illustrated.
3 Attach the outer belt holder f securely
to the inner belt holder.
4 Attach the remote control unit to the
belt holder. Align the claws of the inner
belt holder with the grooves of the
remote control unit, then slide the
remote control unit while pressing the
unit toward the holder to secure it. You
can slide the unit toward either side,
depending on the installation location.
Note
When you install the remote control unit in a
vehicle with left-hand drive, be sure to install it on
the inner rim on the right-hand side of the steering
wheel. On a vehicle with right-hand drive, install
it on the left-hand side.
STEERING-WHEEL-MOUNTED REMOTE
CONTROL UNIT