Filter
Top Products
1
2
3
4
4 2
Prees PWR to turn the unit on.
Press BAND to select the bend from
among FMI, FM2, FM3, AM1, and
AM2.
Tune in the station that you wish to
preset with TUNE A or TUNE V.
Press one of the preset station buttons
1 to 6 for approximately 2 seconds.
While the station you are presetting is bsing
registered in memory, the sound is
momentarily muted.
The number of the pressed preset station
button appears next to the frequency
indication.
Presetnumber
Repeat these procedures topreset upto 6stations
each for FMI, FM2, FM3, AM1, and AM2.
●You can manually preset stations that have not
been selected by auto msmory.
● If you try to preset a station on a preset station
button on which another station of the same
band has already been preset, ths previously
preset station will be erased.
1
2
3
32
Press PWR to turn the unit on.
Press BAND to select a desired band
from among FMI, FM2, FM3, AM1, and
AM2.
Prese the desired preset station button.
The number of the pressed preset station
button appears next to the frequency
indication.
Active tuning reception control (ATRC)
This unit automatically suppresses FM noise
caused by varying signal strength resulting from
movement of the car.
● The built-in automatic blendhg circuit mixes the
Isft and right channel signals according to the
strength of the reception. At the same time, the
high-cut circuit activates to maintain the sound
quality.
● Ifthe recaption becomes even weaker, the unit
automatically switches to Monaural mode to
reduce noise.
7 ENGLISH