Filter
Top Products
~ TROUBLESHOOTING
In the following cases, the corresponding error code indicator is displayed.
m
Error code
Cause Solution
E--2, E--3, E--6, E--8
] The disc is not inserted or ejected I Press RESET and insert the disc
properly.
again.
E--4, E--5, E--7
The disc cannot be read properly. The disc may be damaged or
dirtv. Insert another disc.
E--9
The ambient temperature is too
Allow the unit to cool off (by
high.
moving the car out of direct
sunlight, etc.).
Reset button
=
====+
RESET
The
reset button (RESET) is located on the front side of the unit behind the control panel (see
“DETACHING THE CONTROL PANEL” on page 4).
If the unit does not operate properly, press RESET with a pointed object such as a pencil, etc. to reset
it, Note that the memory contents are erased when pressing RESET.
117