Filter
Top Products
Press the following buttons to operate tape
TAPE PLAYBACK
3 1
DIR
1
1
2
3
Press OPEN to open the front panel
and insert a cassette.
Playback starts in the direction that the unit
played back previously.
A (eject) button
Close the front panel,
Tape running indicator
Adjust the volume with +/-.
Notes
● If a cassette is already inserted, press DIR to
start playback.
● Be sure to close the front panel after inserting or
ejecting a cassette.
transporl.
To do this
Eject the cassette
Change the playback
side
Stop fast-forwarding or
rewinding and resume
playback
Fast-forward either side
of the tape
Rewind either side of
the tape
Stop the tape and turn
the unit off
Press this button
@
(for more than
2 seconds)
● At the end of the tape in Fast Forward mode, the
other side of the cassette will start playing
automatically.
● At the end of the tape in Rewind mode, the same
side will start playing automatically.
Direction indications
=
F~J] Displayed when the upper side of the
p~i’ Displayed when the lower side of the
Tape transport display
When you start tape playback, the transport
display indicates the tape movement.
Upper side: During playback,
fast-fowarding
Lower side: During rewindina
Lower side: During playback,
fast-fowarding
Upper side: During rewinding
During fast-forwarding or rewinding, the transport
display accelerates.
Before turning the ignition off
Be sure to eject any cassette from the unit before
turning the ignition off.
mm
ENGLISH 10