Filter
Top Products
TAPE PLAYBACK
SOUNDADJUSTMENTS
Switching modes
When the unit is in Radio or CD Changer Play
mode, inserting a cassette switches the unit to
Tape Play mode automatically.
Topreventtapeproblems
Before inserting a cassette into the unit, make
sure that there is no slack in the tape. If necessary,
take up the slack by inserting a pencil into the
spindle hole and winding.
Tapes of 90 minutes or longer are extremely thin
and easily deformed or damaged. They are not
recommended.
22
1
2
MUTE
Press SEL to select the mode that you
wish to adjust from: VOL (volume),
BASS (bass), TRE (treble), BAL
(balance) and FAD (fader).
The following indications appear in cyclic
order.
If you do not proceed with step 2 within 5
seconds, the selected mode is canceled, and
the indication returns to the current source
mode.
Press +/– to adjust the level.
Press and hold either button to change the
level rapidly.
+
Decreases the
Increases the
volume level
volume level
Decreases the
Increases the
bass level
bass level
Decreases the
Increases the
treble level treble level
Decreases the Decreases the
level of the right level of the left
speaker(s) speaker(s)
Decreases the
Decreases the
level of the front level of the rear
speakers
speakers
Without selecting any mode with SEL, only
the volume level can be adjusted by pressing
+/–.
MUTE button
Press this button to temporarily Iowerthevolume.
Press it again to restore the previous volume.
11 ENGLISH