Filter
Top Products
21-EN
Displaying Notification List
You can view the received Notification from Facebook in the connected
Smartphone via this unit.
1
Press and hold VSOURCE for at least 2 seconds.
The received Notification will be displayed according to when it
was posted.
2
Turn the Rotary encoder to select the desired Notification,
and then press ENTER.
3
Then go to step 2 of “Receiving Notification”.
Notes
• When there is no Notification, “NO NOTIF” will be displayed.
• The displayable amount of the Notification list depends on the
connected Smartphone.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press ENTER.
AUDIO
*1
GENERAL DISPLAY TUNER SIRIUSXM
*2
iPod APP BLUETOOTH
*3
(e.g. Select GENERAL)
GENERAL:
CLOCK ADJ
*4
AUX SETUP AUX NAME
*5
INT MUTE
PLAY MODE
*6
STAY ON DEMO MODE
DISPLAY:
DIMMER TEXTSCROLL SCROLLTYPE
TUNER:
TUNER FREQ FM SET
iPod:
iPod LIST
APP:
ALPINE APP TTS VOLUME
*1 Refer to “Sound Setting” on page 15.
*2 Refer to “SiriusXM Setting” on page 36.
*3 Refer to “BLUETOOTH SETUP” on page 25.
*4 Refer to “Setting Time” on page 10.
*5 Displayed only when AUX SETUP is set to ON.
*6 CDE-153BT only.
3
Select an Item with the Rotary encoder, and then press
ENTER.
(e.g. Select AUX SETUP)
4
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select ON or OFF)
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
AUDIO/SETUP
6
/SOURCE
/ENTER
Rotary encoder