Filter
Top Products
8-EN
Setting the Rear Camera
When the rear camera is connected, rear pictures are output
on the screen.
Setting item: CAMERA-IN
Setting contents: OFF / ON
ON: When the shift lever is set to reverse (R),
the rear camera picture is shown on the
screen.
OFF: The rear pictures are not output.
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly
connected.
Setting the AUX Mode
Setting items: AUX IN-1 to 3
Setting contents: OFF / ON
OFF: AUX source is not displayed.
ON: AUX source is displayed.
•OFF is not selected when the optional DVD player or DVD
changer is connected.
•AUX IN-3 is adjustable when the external expansion box
(VPE-S431) is connected.
Naming External Devices
When more than one external device is connected, you can
name each (up to 3) as you like.
Setting item: AUX IN-1 to 3 NAME
Setting contents: AUX-1 (2, 3) / VCR / GAME-1, 2 / TV
*
/
EXT-DVD
*When an optional TV is connected, set the unit to TV. Refer
to “TV Operation” (page 18).
• The selected source name is displayed instead of AUX
source name.
Adjusting the External Input Audio Level
Setting item: AUX IN-1 to 3 LEVEL
Setting contents: LOW / HIGH
LOW: Decreases the external input audio level
HIGH: Increases the external input audio level
Setting items:
NAV. ↔ NAV. MIX LEVEL ↔ DISPLAY-TYPE SEL. ↔
VOLUME LEVEL ↔ CAMERA-IN ↔ REMOTE CONTROL
SEL.* ↔ VIDEO SOURCE SEL.* ↔ AUX IN-1 (2, 3) ↔
AUX IN-1 (2, 3) NAME ↔ AUX IN-1 (2, 3) LEVEL ↔
MONITOR OUT-1 ↔ MONITOR OUT-2 ↔ IN-INT MUTE
↔ VISUALIZER SEL. ↔ PLAY MODE ↔ AUTO SCROLL
↔ BACKGROUND SEL. ↔ DEMO ↔ NAV.
*Refer to the “Switching Each Monitor Source (VIDEO
SOURCE SELECT Function)” (page 6).
3
Pressing g or f changes to the setting.
4
To finish the setting, press and hold MUTE
for at least 2 seconds.
Setting the Navigation Mode
When you connect an optional navigation equipment, set it to
ON.
Setting item: NAV.
Setting contents: OFF / ON
ON: Navigation source is displayed.
OFF: Navigation source is not displayed. The
settings related to the navigation can not be
changed from this unit.
Navigation Audio Interruption Volume
Adjustment
With an Alpine navigation system connected to the VPA-
B211A, the voice guidance of the navigation system will be
mixed with the DVD or CD play.
You can adjust the volume level of the voice guidance.
Setting item: NAV. MIX LEVEL
Setting contents: OFF, +1 to +15
•When NAV. is turned on, the setting can be made. Refer to
“Setting the Navigation Mode” (this page).
Setting the Display Type
Depending on your external monitor, the screen may not be
correctly displayed. In this case, change the type.
Setting item: DISPLAY-TYPE SEL.
Setting contents: TYPE1 / TYPE2
Setting the Volume Level
The volume level can be set for each source.
Setting item: VOLUME LEVEL
Setting contents: LOW / MID / HIGH
• The sound level increases as follows: LOW → MID →
HIGH.